DAKA® Hard Case - C35

The Magpul DAKA Hard Case, C35 fixes the many shortcomings of current hard case offerings, providing a stronger, easier-to-use, and more reliable transportation and storage system. Combined with our innovative DAKA GRID Organizer, the DAKA Hard Case creates a premium storage solution that’s optimized for you and your gear, both inside and out. Streamlined, easy to maneuver, and full of usable protective space, it includes advanced features such as better latches, recessed lock housings, ergonomic handles, and dependable wheels, all in a package that provides greater protection for your important gear. The DAKA Hard Case has also removed the many potential snagging points that typically lead to case damage, ensuring it glides smoothly over most surfaces while in transit.

Built around the uniquely customizable DAKA GRID Organizer, the C35 was designed to hold shorter rifles comfortably, along with much of the additional equipment required to travel with your firearms. As opposed to traditional foam inserts, the DAKA GRID doesn’t trap moisture, dirt, or other contaminants. It’s lighter, endlessly customizable, and significantly stronger than traditional foam, providing measurably better organization and protection.The DAKA GRID is made of individual Expanded Polypropylene (EPP) End Panels, Center Panels, and DAKA Blocks that nest securely together to create an advanced drop-in system that compartmentalizes your gear. The DAKA Blocks can be easily pressed into the GRID Panels and are just as easily removed and reinstalled to fit the needs of whatever you’re carrying. The C35 includes 8 (eight) triple Blocks and 8 (eight) double Blocks to customize your loadout, and additional Blocks are available if needed. If you’re carrying wider or taller equipment such as lights, bipods, or lasers, a center GRID Panel can also be cut down in size or removed to open up space for objects up to 4.25” inches wide, as long as you brace both ends of the firearm on the other panels. If you end up needing to cut a Panel to create a unique cavity for your wider gear, the EPP cuts smoothly, doesn’t flake like regular foam, and doesn’t lose its strength or ability to protect your important equipment.

The DAKA Hard Case's rounded, double-walled corners provide strength and decrease snagging during transport while creating bumper zones for added impact resistance that double as storage pockets for other necessary equipment. Its water and weather-resistant gasket also keeps out dust and moisture and provides self-equalizing pressure control, keeping the contents safe from the effects of external environmental factors. The Hard Case’s injection molding technology provides greater strength and case integrity compared to other conventional cases, with durability and drop performance that stands up to the toughest shipping, travel, and hard-use environments.

The latch design, along with the greater case rigidity, makes the latches simple to use and incredibly rugged. Each latch features a large, easily operated push-button release that can be activated with one hand. When pressed, the latch opens and remains in the open position, and it can be used as a handle to open the lid. The latch closes with simple downward pressure anywhere on the latch body, and there’s a clear audible “click” when it’s secured. The innovative latch design also features a reimagined latch lockout system. Each latch on the DAKA Hard Case contains one lock pass-through and, once a lock is installed (we recommend a lock with a 5/16” thick shackle and a 1-1.5” interior clearance), the latch cannot be opened until the lock is removed, which secures the entire case. Additionally, each latch features a lock housing and a zip tie pass-through that allows the user to secure the lock to the case, protecting the lock and the case from damage due to impacts. The Hard Case includes four Velcro straps for this purpose.

Nesting lugs provide a positive interface when DAKA Hard Cases are stacked on each other, and two built-in strap recesses keep ratchet straps in place and secured during use. There are two large main handles that are easy to manipulate under load, and a third, integrated handle near the wheels makes the case easier to move and allows the case to stand vertically on its own. The handles have cross sections that are modeled on Magpul pistol grips for greater comfort and control, and they recess completely into the case’s frame. They’re designed to stay open once they’re extended and stay closed when not in use. The wheels are designed for smooth rolling and longevity, with reduced noise, friction, and debris incursion thanks to the ball bearings, rubber overmolding, and reinforced polymer hubs.

This C35 Case has interior measurements of 35.3 x 16.6 x 5.5" and works best with AR15 carbines, SBR's, PCC's, and other smaller sized weapons.

Hard Cases made in the USA.

ADVANCED INJECTION MOLDING TECHNOLOGY PROVIDES GREATER STRENGTH, DURABILITY, AND CASE INTEGRITY

• Gas charged polypropylene reduces weight and its micro-lattice structure creates a tough outer shell
• Sleek and streamlined outer design means minimal places for snags to occur
• Hinges provide stability when open and are nested in a polymer housing to prevent tampering and break-ins

INTERNAL STORAGE AREA BUILT AROUND THE TRANSFORMATIONAL DAKA GRID ORGANIZER

• DAKA GRID Organizer Panels and Blocks are lighter, easy to use, and customizable for every loadout
• Reconfigurable without tools to maximize storage capacity and ensure gear stays in place
• The GRID doesn’t absorb moisture, dirt, or other contaminants like open cell foam, and it wipes clean with a damp cloth
• Stronger GRID and Hard Case combination provides better overall protection for your gear

THE DETAILS THAT MATTER FOR A GREAT CASE

• Internal corner pockets create an impact-resistant bumper zone that also provides extra storage space for small objects
• Water and weather-resistant gasket keeps out dust and moisture and includes self-equalizing pressure control
• Case frame includes lugs at the base that interface with the lid, allowing cases to nest together
• Strap recesses keep straps in place to mitigate shifting in transit

UNIQUE LATCH DESIGN MAKES OPENING, CLOSING, AND LOCKING A SNAP

• Two cammed, push-button latches can be opened and closed with one hand
• Latches include recessed lock attachment points vs having locks attach outside the latch to prevent prying
• Lock and zip tie pass-throughs secure locks within the latch and streamline the case, preventing impact damage to the lock and the case

HANDLES ARE COMFORTABLE AND FUNCTIONAL

• Handle cross sections are modeled on our pistol grips for maximum comfort and grip
• The two hinged handles are longer than standard handles for more grip flexibility
• Handles are designed to remain in when stowed and to stay out when deployed
• A third, fixed handle located adjacent to the wheels makes gripping and maneuvering the case easier